Factory-tested, thermal-rated, and fully customizable OEM systems designed for zero downtime in severe desert operating conditions.
Fully enclosed, weather-sealed prefabricated substation designed for high-ambient heat and heavy sand dust resistance across Iraqi power grids.
Get Catalog
High-speed dual-power switching mechanism ensuring instantaneous transition to redundant utility or generator power during main grid blackouts.
Get Catalog
High-capacity 48V/51.2V energy storage unit with smart BMS tracking, engineered for peak shaved power and continuous microgrid performance.
Get Catalog
Flexible OEM rack-mountable battery enclosure tailored for scalable telecommunications backup and industrial microgrid installations.
Get Catalog
Commercial-grade 51.2V storage array with wireless operational telemetry, fast thermal dissipation, and extended cycle life over 6,000 cycles.
Get Catalog
Heavy-duty structural framework designed for field inspection personnel operating across remote infrastructure, pipelines, and energy fields.
Get Catalog
Space-optimized redundant lithium battery bank featuring modular expansion capabilities for institutional and oilfield headquarters backup.
Get Catalog
Precision stackable system equipped with digital LCD diagnostic telemetry and active balancing BMS for maximum failure protection.
Get CatalogIraq’s industrial landscape—spanning from the oilfields of Basra and Rumaila to the expanding commercial centers of Erbil, Baghdad, and Mosul—presents one of the world's most demanding physical and electrical environments for power conversion and distribution infrastructure. Industrial operators, EPC contractors, and public sector engineers face a dual challenge: high ambient temperatures frequently exceeding 55°C in peak summer months, combined with severe grid instability characterized by frequent voltage sags, Total Harmonic Distortion (THD) spikes, and recurring utility outages.
In this challenging operational framework, standard off-the-shelf power equipment experiences accelerated thermal degradation, frequent component failure, and costly operational downtime. As a premier Custom OEM Redundant Systems Manufacturer & Factory serving the Iraq market, our engineering paradigm centers on absolute risk mitigation through high-gain information transfer, structural ruggedization, and fault-tolerant redundancy topologies.
“Redundancy in extreme climates is not merely doubling hardware; it is calculating high-ambient thermal derating, isolating harmonic resonance, and engineering instant zero-transient hot-swappable fault isolation.”
Our OEM manufacturing facilities design and build custom N+1 redundant AC-DC power supply racks, high-voltage prefabricated outdoor substations (10kV–35kV), and heavy-duty LiFePO4 battery energy storage systems (BESS). By maintaining direct end-to-end engineering control over transformer winding, enclosure thermal dynamics, active diode-ORing logic, and digital BMS telemetry, we ensure every system deployed to Iraq performs continuously despite hostile desert environments.
To eliminate single points of failure (SPOF) across critical operations, our custom manufacturing process integrates several key proprietary technological modules:
Ensures equal load balancing across parallel power supplies with zero-transient switchover (<4ms) upon module fault detection.
Heavy-gauge stainless or galvanized steel enclosures equipped with positive-pressure ventilation and micro-particle filters.
Internal copper busbars, heavy heat sinks, and wide-gap airflow architecture rated for continuous 100% full load operation at 55°C.
The table below highlights the critical engineering deltas between baseline industrial power systems and our high-gain OEM redundant systems specifically engineered for the Iraqi market:
| Specification Parameter | Standard Commercial System | Our Custom OEM Redundant Spec (Iraq) |
|---|---|---|
| Operating Ambient Temperature | -10°C to +40°C (Derated >40°C) | -20°C to +65°C Continuous (Full Load @ 55°C) |
| Redundancy Topology | Single unit or 1+1 Cold Standby | N+1 / N+2 Hot-Swappable Active Current Sharing |
| Enclosure Ingress Rating | IP20 – IP42 (Indoor Venting) | IP55 / IP65 / IP66 Sand-Filtered NEMA 4X |
| Harmonic Tolerance (THD) | < 5% Input THD Required | Tolerates up to 20% Voltage THD without Tripping |
| ATS Transfer Delay | 15ms – 30ms (Breaks Sensitive Loads) | Instantaneous < 4ms (Phase-Synchronized) |
| Battery Chemistry & Life | Standard Lead-Acid (2-3 yr life @ 40°C) | LiFePO4 with Smart BMS (6000+ Cycles @ 80% DOD) |
In remote extraction sites throughout Al-Qurna and Majnoon, pipeline telemetry, SCADA nodes, and emergency shutdown (ESD) valves require uninterrupted 24VDC or 125VDC auxiliary power. Grid outages are frequent, and diesel generator startup delays can corrupt sensitive instrumentation. Our factory builds rack-mounted N+1 redundant switching power supplies paired with stackable 51.2V 300Ah LiFePO4 battery banks housed within explosion-proof, IP66 thermal-conditioned shelters. Dual isolation diodes prevent single-module short circuits from pulling down the primary DC busbar, maintaining operational control under all conditions.
Rapid urban reconstruction and industrial park developments require turnkey medium-voltage distribution solutions that bypass lengthy civil construction timelines. We manufacture American-Type and European-Type compact prefabricated box substations (10kV to 35kV) engineered with integrated SF6 gas-insulated switchgear (GIS), low-loss step-down transformers, and automated ATS switchboards. Delivered completely pre-wired, factory-tested, and drop-shipped directly to job sites via Umm Qasr Port or land transit, these substations reduce field commissioning time by up to 70%.
Hospitals, server farms, and manufacturing plants in Iraq increasingly rely on hybrid solar-diesel microgrids to offset high fuel costs and utility load shedding. Our stackable 16S 48V/51.2V LiFePO4 battery enclosures with 200A active balancing BMS interface seamlessly with 100A-400A dual-power Automatic Transfer Switches. During grid drops, the ATS shifts load to the energy storage system within milliseconds, suppressing voltage transients and delivering clean sine-wave power without disruption.
Iraq’s Ministry of Electricity (MoE) and private energy consortiums are aggressively pursuing grid modernization, renewable energy integration (targeting 10GW of solar power by 2030), and decentralized energy resilience. These initiatives drive key shifts in OEM technical specifications:
When specifying critical infrastructure for high-risk operating environments, purchasing white-labeled or re-badged equipment introduces unquantifiable operational risks.
Every power supply, ATS cabinet, and prefabricated substation module is assembled, wired, and load-tested at our own state-of-the-art facilities. Units undergo full thermal burn-in testing under max load conditions prior to export shipment.
Our Custom System Builder platform allows consulting engineers to specify exact input voltages (115V, 230V, Universal AC, or DC-DC inputs), output voltage combinations (0–5Vdc to 30kVdc), front panel metering, circuit breakers, and custom paint finishes.
We manage international packing standards (ISPM-15 heat-treated wooden crates), export documentation, Certificate of Origin legalization, and direct shipping logistics through major air transport or ocean freight routes into Umm Qasr.
We stand behind our metal-enclosed power supplies and redundant industrial systems with a standard 5-year warranty, supported by dedicated application engineers available for remote field diagnostics.
Clear answers to common questions asked by Iraqi project managers, EPC contractors, and procurement officers.
Standard 3-day power supply models are built to order and shipped within three business days. Custom N+1 redundant assemblies, multi-output rack systems, and modular battery enclosures typically complete manufacturing within 9 business days. Large prefabricated outdoor substations (10kV–35kV) operate on projected engineering schedules based on specific custom CAD drawings.
Our units utilize conservative electrical component derating, wide aluminum and copper heat-sink footprints, heavy-gauge steel enclosures with micro-particle sand filters, and option-ready forced-air or liquid cooling systems. This ensures continuous operation at rated capacity up to 55°C ambient temperatures without thermal shutdown.
Yes. Our in-house engineering team routinely builds custom power configurations, specialized rack panel layouts, custom wiring looms, and outdoor NEMA 4X / IP66 enclosures tailored precisely to customer schematic drawings and project tender specifications.
All export shipments include full commercial invoices, legalized Bills of Lading / Air Waybills, Certificate of Origin (COO), factory test inspection reports, ISO 9001:2015 certificates, and detailed packing lists. TAA compliance certificates are also available upon request for defense and government integrator projects.
LiFePO4 (Lithium Iron Phosphate) offers superior thermal stability, zero risk of thermal runaway, and delivers over 6,000 charge/discharge cycles at 80% Depth of Discharge (DOD), compared to less than 1,000 cycles for traditional lead-acid batteries under high-heat Iraqi field conditions. This significantly lowers Total Cost of Ownership (TCO).